Products
OEM Factory for The Drum Of Drilling Rig - lebus grooved drum for tower crane – Junzhong
OEM Factory for The Drum Of Drilling Rig - lebus grooved drum for tower crane – Junzhong Detail:
| Drum Quantity | Single |
| Drum Design | LBS Groove Or Spiral Groove |
| Material | Carbon Stainless And Alloy Steels |
| Size | Customization |
| Application Range | Construction Mining Terminal operation |
| Power Source | Electric and hydraulic |
| Rope Capacity | 100~300M |
the use of environment:
1. Outdoor use is allowed;
2. The altitude does not exceed 2000M;
3. Ambient temperature -30℃ ~ +65℃;
4. It is allowed to work under rain, splash and dust conditions.
Product Model:
This rebus reel model is: LBSZ1080-1300
Represents the diameter of the Ribas drum is 1080mm, the length is 1300mm,
Precautions for the use of crane winch
1,The wire ropes on the crane drum should be arranged neatly. If overlap and oblique winding are found, they should be stopped and rearranged. It is forbidden to pull the wire rope by hand or foot in rotation. The wire rope shall not be completely released, at least three laps shall be reserved.
2, crane wire rope is not allowed to knot, twist, in a pitch break more than 10%, should be replaced.
3. In the crane operation, no one shall cross the wire rope, and the operator shall not leave the hoist after the object (object) is lifted. Objects or cages should be lowered to the ground when resting.
4. In the operation, the driver and signalman should maintain good visibility with the lifting object. The driver and signalman should cooperate closely and obey the unified command of the signal.
5. In case of power failure during crane operation, the power supply should be cut off and the lifting object should be lowered to the ground.
6, work to listen to the signal of the commander, the signal is unknown or may cause accidents
The operation should be suspended and the operation can be continued until the situation is clear.
7. In case of sudden power failure during crane operation, the brake knife should be opened immediately to put down the goods.
8. After the operation is completed, the material tray should be landed and the electric box should be locked.
9, crane wire rope in the process of use and mechanical wear. Spontaneous combustion corrosion of local damage is unavoidable, should be intervals coated with protective oil.
10. Overloading is strictly prohibited. That is, more than the maximum carrying tonnage.
11. Attention should be paid not to knot the crane during use. Crush. Arc wound. Erosion by chemical media.
12, shall not be directly lifted high temperature objects, for objects with edges and corners to add protection plate.
13, in the process of use should often check the wire rope used, reach the scrap standard should be scrapped immediately.
Product detail pictures:
Related Product Guide:
As for aggressive price ranges, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such high-quality at such price ranges we're the lowest around for OEM Factory for The Drum Of Drilling Rig - lebus grooved drum for tower crane – Junzhong , The product will supply to all over the world, such as: United States, Turkey, Kenya, The design, processing, purchasing, inspection, storage, assembling process are all in scientific and effective documentary process , increasing usage level and reliability of our brand deeply, which makes us become superior supplier of the four major product categories shell castings domestically and obtained the customer's trust well.
By Kitty from Sri Lanka - 2018.06.05 13:10
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Dinah from UK - 2017.10.27 12:12
